How to Evaluate Chemically Resistant Adhesives

Posted on 8/15/2012 6:16:15 PM. By MASTERBOND



Posted on 6/29/2012 2:12:13 PM. By Maxwell James Davis & Andrew McGregor

This paper explains the mechanisms of formation and degradation of adhesive bonds, and how a degrading interface can cause a transition f...


The next generation windows a new source of energy (reduction)

Posted on 6/8/2012 2:47:49 PM. By FEICA

Sealants and Adhesives have been in use for thousands of years. In biblical times the Tower of Babel was reportedly built with mortar and...


Moving more with less CO2 - Bonding in the Automotive Industry

Posted on 6/8/2012 2:44:54 PM. By FEICA

The motor car has been with us for more than 120 years. Initially it was expensive and exclusively for the wealthy, but gradually it beca...


Guidance for Selecting a Contractor for the Installation of Spray Polyurethane Foam (SPF) in School Buildings

Posted on 5/23/2012 3:02:33 PM. By ACC

This guidance is intended to provide useful information to school administrators, design planners, facilities managers and others about h...


Understanding Roll Length--US

Posted on 5/1/2012 3:31:12 PM. By Kramer Associates


Understanding Roll Length--Metric

Posted on 5/1/2012 3:30:25 PM. By Kramer Associates


White Paper: Hydraulic Press Calculations

Posted on 3/7/2012 8:19:40 PM. By


Treat Me Right

Posted on 3/7/2012 8:05:38 PM. By Linda Ray and Dave Deib

Reactive hot melt polyurethane (PUR) adhesives  just need a little special attention for optimal performance