Menu

Adhesives Research Helps Improve Wearable Sensors’ Body Function Monitoring Capabilities

Posted on 2/19/2020 1:14:34 PM. By ASC

Wearable sensors are increasingly being used in medicine to collect data on body functions such as vital signs and blood sugar levels. Ho...

  

Researchers Create Pressure Sensitive Adhesive from Black Pepper and Castor Oil

Posted on 2/18/2020 3:06:54 PM. By ASC

University of the Basque Country’s POLYMAT Institute have been looking at ways for renewable biological products to play a larger r...

  

Adhesives Allow Micro Cellular Antennas a Safe and Secure Future

Posted on 2/13/2020 12:56:47 PM. By ASC

The usual conception of an antenna may be that of a large external pole supported by wires and sometimes mounted on cement to survive the...

  

New Chemical and Heat Resistant Adhesive System

Posted on 2/12/2020 6:09:59 PM. By ASC

MasterBond has introduced a new adhesive aimed at the military, aerospace, electronic, electrical and original equipment manufacturers wh...

  

New Silicone Backing Adhesive Film Getter for Aerospace, Medical and Electronics Applications

Posted on 2/11/2020 1:09:08 PM. By ASC

With moisture one of the biggest threats to integrated circuits, MacDermid Alpha electronics company has added a silicone film getter, ST...

  

New Adhesive Trio Launched for Keeping Turf on the Ground

Posted on 2/6/2020 5:39:48 PM. By ASC

Synthetic turf was introduced to remove some of the problems (like cutting natural grass) in gardens and sporting venues. However, the ne...

  

Sika Set to Acquire Leading Romanian EPS and Mortar Manufacturer

Posted on 2/4/2020 1:04:28 PM. By ASC

Sika plans to add Romanian mortar and thermal insulation company Adeplast SA to its stable. According to Sika, the Romanian company and i...

  

Rewiring with Conductive Adhesives Key to Boosting Solar Cell Joints Efficiency

Posted on 1/30/2020 5:23:12 PM. By ASC

Looking for new ways to up the efficiency of solar cells, the US Department of Energy’s National Renewable Energy Lab (NREL) has re...

  

Sealants Prove Critical to Home Efficiency During Harsh Winters

Posted on 1/29/2020 1:19:09 PM. By ASC

When winter invades the home it can leave it looking tatty and old from the outside, and covered in dust and dirt inside. There’s a...

  

Three Critical Factors to Achieving a High Quality Bond for Medical Devices

Posted on 1/23/2020 1:14:10 PM. By ASC

Many factors affect the strength of the bonded joints in medical devices. These include the design of the joint and the substrates involv...