Menu

Painter’s Tapes vs. Masking Tape – The Adhesive Strength Makes All the Difference

Posted on 5/13/2021 1:00:44 PM. By ASC

The difference between masking and painter’s tapes lies largely in the difference in adhesive strength and that’s what makes ...

  

New No Residue Water-Based Adhesive and Liner for Vinyl

Posted on 5/12/2021 12:39:40 PM. By ASC

A new and advanced water-based adhesive which doesn’t leave a milky residue after wet application on films has been specifically fo...

  

New Water-based Adhesive to Help Meet Increasing Demand for Paper Straws

Posted on 5/11/2021 1:02:58 PM. By ASC

As the demand for straws moves from plastic to paper as a result of concerns regarding ocean pollution, and increasing numbers of regulat...

  

Exploring the Use of Surfactants on Adhesive and Sealant Bonds

Posted on 5/6/2021 12:37:16 PM. By ASC

Surfactants, chemical compounds also known as a surface-active agents, can play an important part in the reliability of manufactured prod...

  

New N95 Mask Utilizes Adhesives Instead of Straps and Loops

Posted on 5/5/2021 1:01:10 PM. By ASC

Avery Dennison Medical has partnered with Global Safety First in the formulation of a new NIOSH certified, FDA registered, and ISO 13485 ...

  

Ford and Michelin’s Use of Polymer Adhesive Key to Self-Sealing Tire Technology

Posted on 5/4/2021 12:50:52 PM. By ASC

Auto giant Ford has been collaborating with Michelin Tires regarding the tire company’s  Self-Seal tire technology over the pa...

  

Underwater Adhesive Curing Time Cut from a Day to One Minute

Posted on 4/29/2021 2:42:33 PM. By ASC

Researchers at the Johns Hopkins Applied Physics Laboratory (APL) have discovered a way to increase the effectiveness and efficiency of u...

  

An Adhesive Stick with 97% Natural Ingredients and 65% Post-industrial Recycled Plastics

Posted on 4/28/2021 4:30:53 PM. By ASC

Henkel has relaunched its stalwart craft adhesive, Pritt Stick. In formulating the 2021 edition of the roll-on adhesive which has been fo...

  

3D Printing and Additive Manufacturing Bonded Together by Adhesives

Posted on 4/27/2021 12:32:24 PM. By Spatial.com

3D printing and additive manufacturing are often thought of as being completely different because of their techniques. Yet 3D printing ec...