Menu

Multi-Function Adhesives Key to Smart Systems for Needle Bonding and Syringe Assembly

Posted on 6/2/2021 12:57:43 PM. By ASC

The high demands made by needle bonding and syringe assembly, the highest volume  production area of the medical sector have led to ...

  

New Water-Dissolvable Adhesive and Paperstock for Temporary Labels

Posted on 6/1/2021 2:58:11 PM. By ASC

Pressure-sensitive adhesive coating company, Acucote Inc, has produced two new dissolvable paperstocks and a new water dissolvable adhesi...

  

New Silicone Sealants Based on Renewable Raw Materials

Posted on 5/25/2021 1:03:28 PM. By ASC

Wacker has introduced its first range of sustainable silicone sealants formulated using renewable raw materials with the launch of the El...

  

New Two-Component Dispensing Valve for Adhesives

Posted on 5/24/2021 2:19:42 PM. By ASC

Fluid handling equipment manufacturer Graco, Inc has introduced a new two-component dispensing valve aimed at improving process performan...

  

Painter’s Tapes vs. Masking Tape – Adhesive Strength Makes All the Difference

Posted on 5/20/2021 12:28:22 PM. By ASC

The difference between masking and painter’s tapes lies largely in the difference in adhesive strength and that’s what makes ...

  

New Anti-Microbial Adhesive Vinyl for Controlling Bacteria Growth

Posted on 5/18/2021 12:53:47 PM. By ASC

UK visual communication solutions company Beaverswood has introduced a new adhesive vinyl aimed at reducing germ and bacterial growth in ...

  

Painter’s Tapes vs. Masking Tape – The Adhesive Strength Makes All the Difference

Posted on 5/13/2021 1:00:44 PM. By ASC

The difference between masking and painter’s tapes lies largely in the difference in adhesive strength and that’s what makes ...

  

Exploring the Use of Surfactants on Adhesive and Sealant Bonds

Posted on 5/6/2021 12:37:16 PM. By ASC

Surfactants, chemical compounds also known as a surface-active agents, can play an important part in the reliability of manufactured prod...

  

Underwater Adhesive Curing Time Cut from a Day to One Minute

Posted on 4/29/2021 2:42:33 PM. By ASC

Researchers at the Johns Hopkins Applied Physics Laboratory (APL) have discovered a way to increase the effectiveness and efficiency of u...

  

3D Printing and Additive Manufacturing Bonded Together by Adhesives

Posted on 4/27/2021 12:32:24 PM. By Spatial.com

3D printing and additive manufacturing are often thought of as being completely different because of their techniques. Yet 3D printing ec...